The premium collection contains a parquet board of an oak cottage, which has a single -lane execution with a upper layer of whole oak and a thickness of about 4 mm. Outwardly, such a parquet is practically not distinguished from a massive board. The whole front layer gives this parquet high stability to various kinds of microclimatic differences and strength. Parquet planks themselves have a large width and as already mentioned, they look like a parquet from a premium array. But its advantage over this is that it is much easier to lay it, without the formation of gaps and cracks.
Manufacturers are mainly customary to use coniferous wood in the inner layers, and here you can observe a completely different turn. Here, the wood of gvee is laid inside. This tree has a greater uniformity and density of texture, its indicator of stability is higher than that of coniferous. And on the bottom layer of the board there is a solid veneer of gveei. But it is possible to deviate from the rules and use a slight fusion of the planks. This creates additional protection against humidity from the inside.
Parquet of the brand Baum Oak Cottage is subjected to artificial aging procedure, t. e. Bracing. This is when the upper soft fibers are removed with special hard brushes and the texture of the wood becomes more clear, embossed and silky. The drawing of annual wood rings stands out brighter and the board is not only pleasant to touch, but also to walk on it barefoot. Bracing also allows you to disguise some small mechanical defects of the parquet, such as scratches, dents and chips. But at the same time, leaving such a floor will not cause you special trouble and wash it easily, since the relief has a slight depth.
On the sides, the board has a chamfer of a rather large saw. Thus, each bar acquires a separate value and the entire gender acquires greater sophistication and nobility. The chamfer is also needed in order to compensate for the expansion and compression of wood, which will necessarily occur under sharp microclimate changes.
Parquet board Baum Oak Cottage has an oil coating of ultraviolet curing, and not in one layer. Due to this, the parquet is ennobled and presented in a more profitable light. The surface after that becomes matte. It should be noted that UV-maslo has all the indicators inherent in the varnish, it is steadfast to wear, does not allow spots to appear.
The fastening of such a parquet board is carried out due to the new generation of Leimlose Montagesystem Unilin. Such a castle has long established itself from the best side and is known to many. The castle will not deteriorate even with multiple analysis and collection of parquet. When installing there is no need to use glue, nails, sealants and other assistant materials.
The base should be well aligned. This can be a concrete screed, sheets of moisture -resistant plywood and so on. According to the standards of laying, a small drop in height is allowed. Previously, a cork substrate or its analogue is laid on the base, and then the floor itself. If the base is a concrete screed or a bulk floor, then it is advisable to spread polyethylene under the substrate.
Duba characteristics
The hardness of the oak on Brinell: 3.8
Oak density: 700 kg/m3
Prices for the Baum Premium parquet board oak cottage
Depending on the volume, this product can be bought at a discount, the size of which can be clarified by the manager
Name
The size
Options
Price for 1 m2
Parquet board Baum Premium Oak Cottage Single -lane (Braced, Art. P13)
1860 x 189 x 15 mm
Coating: uv-maslo
Number m² in pack.:
2.110
563 UAH
* Parquet board is sold packages. The final number of parquet is calculated based on the necessary number of packages.